A gulf coast refinery had a history of corrosion failures in the crude unit overhead bundles costing in excess of $1.0 M/year in equipment, labor, and lost production. The refinery in question was plugging tubes, re-tubing exchangers, or replacing exchangers as frequently as every eighteen months.
Customer Success Stories
Solving a Persistent Corrosion Problem With 3D TRASAR™ Technology for Crude Overhead Systems
The Situation
The Solution
The customer goals were to run turnaround to turnaround without suffering any downtime or lost production due to corrosion failures. Poor overhead performance was impacting the refiner’s safety, and environmental exposure. It was suspected that much of the corrosion damage occurred intermittently as a result of operational changes. The customer needed a way to measure and track the corrosive conditions resulting from changes to directly link back to corrosion performance.
""Automating the corrosion control program dramatically improved corrosion performance, saving the customer $1.16M/yr in total operating costs.""
The Results
Historically the corrosion rate averaged 10 MPY (the real corrosion rate from actual failures was closer to 40 MPY). In Monitor Mode considerable damage occurred during numerous “upsets” (pH drops and chloride/Fe spikes) traced back to poor desalter operation, contaminated crudes, and loss of caustic injection. With the link between upsets and operational changes established, 3DTCOS was placed into Control Mode to reach a new benchmark of less than 4 MPY. Overall corrosion performance was improved 70% with a calculated ROI of $5.0M for a hurdle rate of almost 7:1.
Related Success Stories
Partnering with customers to solve their greatest challenges.
placeholder
Wrapping Up Savings in Papermaking
Read how a pulp and paper company implemented PARETO Mixing Technology to save $95,000 per year....
placeholder
Yellow Metal Corrosion Technology Controls Corrosion
Our latest technology has been specifically designed as an environmentally friendly method to control yellow metal corro...
placeholder
Wringing Out Big Savings for Commercial Laundries
Five leading textile service groups in Australia and New Zealand recently turned to Ecolab to help them: reduce water an...
placeholder
West Coast Refinery Reduces Water Consumption in Drought-Stricken Region
Using its Best Practices Gap Analysis, Nalco Water identified the refinery’s boiler system as a potential reliability ri...
placeholder
Wastewater Automation
3D TRASAR™ Technology for wastewater manages the variability from high solids crudes, improving TCO....
placeholder
Water Savings for ADM Ethanol Facility
Ecolab’s CIP technology and associated chemistries led to more consistent fermentation and enhanced system performance a...
placeholder
Using Digital Insights to Help Reduce Hospital Infection Rates
Proper hand hygiene helps everyone stay healthy in daily life....
placeholder
Tramp Amine Removal with 3DT Desalter Brine
Robust monitoring & control achieves consistent performance without compromising asset reliability. ...
placeholder
This partnership is the whole package
Nalco Water implemented 3D TRASAR™ Water Management Technology to help the turbine condenser operate more efficiently. A...
placeholder
Aquanomic Solids, The Resource-Saving Way to Satisfy Guests
By reducing wash steps, water usage and water temperature, Aquanomics can water and energy use by up to 40 percent – whi...
placeholder
Technical Team Saves Cosmetic Company Nearly €750k
A site survey was performed to determine worst case cleaning scenarios, review existing cleaning procedures, assess mach...
placeholder
The Faster Way to Fight Infections
We developed the first non-bleach concentrate that kills Clostridium difficile spores, and works in half the time of tra...